Mixer, Slicer & Food Prep Repair in Charlotte, NC
Planetary mixers, slicers, food processors and dough equipment are built to last decades with the right service. We repair transmissions, motors, switches and safety interlocks.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
Signs your mixer, slicer and food prep needs service
- Mixer won't start
- Grinding noise from the gearbox
- Speeds slipping
- Slicer blade dull or wobbly
- Bowl lift not working
- Safety interlock fault
Why it fails — and how we fix it
Worn gears, failed motors and switches, and broken safety interlocks are the most common fixes.
- Transmission and gear repair
- Motor replacement
- Switch and interlock repair
- Slicer blade sharpening and bearing repair
- Bowl lift repair
- Electrical repair
Technician tip
Never change mixer speeds while the motor is running — it strips gears.
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Mixer, Slicer & Food PrepBakeries
Planetary mixer grinding in second speed
- What we found
- Worn transmission gear
- What we did
- Replaced the gear and lubricated the gearbox
✓ Usually needs a part ordered — two visits
- Ice MachineHospitals & Senior Living
Nugget ice machine leaking onto the floor
- What we found
- Cracked drain hose behind the unit
- What we did
- Replaced the hose, cleaned and sanitized the machine
✓ Typically fixed in one visit
- Walk-In FreezerSchools & Universities
Ice building up on the freezer floor near the door
- What we found
- Torn door gasket and failed door-frame heater
- What we did
- Replaced the gasket and frame heater wire
✓ Typically fixed in one visit
- Bar Cooler & Back BarBars & Nightclubs
Back-bar cooler bottles not cold
- What we found
- Thermostat out of calibration
- What we did
- Replaced the thermostat and set to 36°F
✓ Typically fixed in one visit
- Soft Serve & Frozen Drink MachineIce Cream & Frozen Yogurt Shops
Soft serve coming out runny
- What we found
- Dirty condenser and worn drive belt
- What we did
- Cleaned the condenser, replaced the belt, adjusted viscosity
✓ Typically fixed in one visit
- Undercounter & Worktop RefrigeratorRestaurants
Chef base losing temperature during the rush
- What we found
- Front grille and condenser clogged with grease
- What we did
- Cleaned the condenser, replaced a worn drawer gasket
✓ Typically fixed in one visit
- Walk-In FreezerIce Cream & Frozen Yogurt Shops
Freezer drain line frozen, water pooling
- What we found
- Drain line heater burned out
- What we did
- Installed a new drain line heater and cleared the line
✓ Typically fixed in one visit
- Commercial OvenBakeries
Convection oven baking unevenly
- What we found
- Blower motor bearings worn
- What we did
- Replaced the convection blower motor
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Mixer, Slicer & Food Prep brands we repair
Mixer, Slicer & Food Prep repair by city
- Mixer, Slicer & Food Prep repair in Ballantyne
- Mixer, Slicer & Food Prep repair in Pineville
- Mixer, Slicer & Food Prep repair in Matthews
- Mixer, Slicer & Food Prep repair in Mint Hill
- Mixer, Slicer & Food Prep repair in Stallings
- Mixer, Slicer & Food Prep repair in Indian Trail
- Mixer, Slicer & Food Prep repair in Weddington
- Mixer, Slicer & Food Prep repair in Wesley Chapel
- Mixer, Slicer & Food Prep repair in Waxhaw
- Mixer, Slicer & Food Prep repair in Monroe
- Mixer, Slicer & Food Prep repair in Fort Mill
- Mixer, Slicer & Food Prep repair in Uptown Charlotte
- Mixer, Slicer & Food Prep repair in South End
- Mixer, Slicer & Food Prep repair in Dilworth
- Mixer, Slicer & Food Prep repair in Myers Park
- Mixer, Slicer & Food Prep repair in SouthPark
- Mixer, Slicer & Food Prep repair in Plaza Midwood
- Mixer, Slicer & Food Prep repair in NoDa
- Mixer, Slicer & Food Prep repair in University City
- Mixer, Slicer & Food Prep repair in Steele Creek
- Mixer, Slicer & Food Prep repair in Cotswold
- Mixer, Slicer & Food Prep repair in Elizabeth
- Mixer, Slicer & Food Prep repair in Eastover
- Mixer, Slicer & Food Prep repair in Blakeney
- Mixer, Slicer & Food Prep repair in Piper Glen
- Mixer, Slicer & Food Prep repair in Providence Plantation
- Mixer, Slicer & Food Prep repair in Rea Farms
How it works
- Call or send the formTell us the equipment and the problem. A dispatcher calls you back.
- Technician arrivesFlat $135 service call. We diagnose and give you a written price.
- You approve the repair$50 off the repair when you booked online. Nothing is done without your OK.
- Covered by warranty30-day labor and 90-day parts on every repair.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Is an older Hobart mixer worth repairing?
Almost always — older Hobart mixers are rebuildable and worth repairing.
Do you sharpen slicer blades?
Yes, as part of slicer service.
How much is mixer, slicer and food prep repair in Charlotte?
The service call is $135. You get a written repair price before work starts and $50 off the repair when you book online.
Which areas do you cover for mixer, slicer and food prep repair?
Charlotte and its neighborhoods, Ballantyne, Pineville, Matthews, Mint Hill, Stallings, Indian Trail, Weddington, Wesley Chapel, Waxhaw, Monroe and Fort Mill, plus Concord, Huntersville, Cornelius, Davidson, Mooresville, Marvin, Indian Land and Tega Cay.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Charlotte and the surrounding area.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |