Turbo Air Repair in Matthews, NC
When a Turbo Air reach-in refrigerator goes down in Matthews, food, sales and inspections are on the line.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
Our technicians arrive with common parts and fix most problems on the first visit. Turbo Air makes reach-ins, prep tables, undercounters and display cases, and we repair them on-site.
Turbo Air service for Matthews businesses
Matthews combines a walkable downtown restaurant row with heavy retail along US-74 and a busy medical corridor. We serve businesses near downtown Matthews on Trade Street, Independence Boulevard (US-74) and Sycamore Commons, including ZIP codes 28104, 28105 in Mecklenburg County, NC.
Because we also work in Mint Hill and Stallings, a technician is often already nearby when a Matthews business calls. Businesses in ZIP 28104 and 28105 can book online in 30 seconds, and the first available operator calls back during business hours. Summer heat in the Charlotte region pushes condensers and compressors to their limit; for Matthews kitchens we check airflow, coil condition and electrical parts on every visit. Our technicians are in Matthews most days of the week, so a call from a business on Sycamore Commons usually fits into the same day's route.
Turbo Air problems we fix in Matthews
- Turbo Air reach-in refrigerator: not cold enough or temperature swings
- Turbo Air reach-in refrigerator: gasket torn or door sagging
- Turbo Air reach-in freezer: product softening or above 0°f
- Turbo Air reach-in freezer: door hard to open or not sealing
- Turbo Air prep table and sandwich unit: ice on the coil
- Turbo Air prep table and sandwich unit: compressor overheating
- Turbo Air undercounter and worktop refrigerator: water underneath
- Turbo Air undercounter and worktop refrigerator: chef base sagging or drawers sticking
- Turbo Air refrigerated display case: case running loud
- Turbo Air refrigerated display case: lights out or flickering
- Turbo Air bar cooler and back bar: water under the cooler
- Turbo Air bar cooler and back bar: doors not closing
Turbo Air equipment we repair
- Turbo Air Reach-In Refrigerator repair in Matthews
- Turbo Air Reach-In Freezer repair in Matthews
- Turbo Air Prep Table & Sandwich Unit repair in Matthews
- Turbo Air Undercounter & Worktop Refrigerator repair in Matthews
- Turbo Air Refrigerated Display Case repair in Matthews
- Turbo Air Bar Cooler & Back Bar repair in Matthews
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Prep Table & Sandwich UnitPizzerias
Pizza prep table rail pans at 46°F
- What we found
- Dirty condenser and weak evaporator fan
- What we did
- Cleaned the condenser, replaced the fan motor, rail back to 39°F
✓ Typically fixed in one visit
- Refrigerated Display CaseGrocery Stores & Supermarkets
Glass-door merchandiser fogging up
- What we found
- Door anti-sweat heater failed
- What we did
- Replaced the door heater and checked the controller
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitRestaurants
Sandwich unit lid won't stay open
- What we found
- Broken lid hinge pin
- What we did
- Replaced the hinge set and adjusted the lid
✓ Typically fixed the same day
- Reach-In FreezerPizzerias
Reach-in freezer frosting up every few days
- What we found
- Defrost heater open circuit
- What we did
- Replaced the defrost heater and tested a full defrost cycle
✓ Typically fixed in one visit
- Undercounter & Worktop RefrigeratorRestaurants
Chef base losing temperature during the rush
- What we found
- Front grille and condenser clogged with grease
- What we did
- Cleaned the condenser, replaced a worn drawer gasket
✓ Typically fixed in one visit
- Reach-In RefrigeratorCafés & Coffee Shops
Dairy reach-in warm at the top shelf
- What we found
- Evaporator fan blade cracked, poor airflow
- What we did
- Replaced fan blade and motor, rebalanced airflow
✓ Typically fixed in one visit
- Reach-In RefrigeratorRestaurants
Two-door reach-in at 45°F on the line
- What we found
- Condenser fan motor not running
- What we did
- Replaced the condenser fan motor and cleaned the coil
✓ Typically fixed in one visit
- Bar Cooler & Back BarBars & Nightclubs
Back-bar cooler bottles not cold
- What we found
- Thermostat out of calibration
- What we did
- Replaced the thermostat and set to 36°F
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Other brands in Matthews
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Do you repair Turbo Air equipment in Matthews?
Yes. We repair Turbo Air reach-in refrigerator, reach-in freezer, prep table and sandwich unit, undercounter and worktop refrigerator, refrigerated display case, bar cooler and back bar for businesses throughout Matthews, NC.
Are you an authorized Turbo Air dealer?
No — we are an independent commercial service company. We repair Turbo Air equipment and warranty our work for 30 days labor and 90 days parts.
How much does Turbo Air repair cost in Matthews, NC?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Matthews?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Matthews, NC.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |