Traulsen Repair in Charlotte, NC
Traulsen makes reach-in and roll-in refrigerators, freezers and blast chillers.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
We repair Traulsen equipment for restaurants, bars, stores and institutional kitchens across Charlotte and nearby cities — $135 service call · $50 off repair.
Traulsen problems we fix
- Traulsen reach-in refrigerator: not cold enough or temperature swings
- Traulsen reach-in refrigerator: frost on the back wall or coil
- Traulsen reach-in refrigerator: compressor clicking on and off
- Traulsen reach-in freezer: product softening or above 0°f
- Traulsen reach-in freezer: heavy frost on the coil or walls
- Traulsen reach-in freezer: door hard to open or not sealing
- Traulsen prep table and sandwich unit: top rail pans above 41°f
- Traulsen prep table and sandwich unit: cabinet cold but rail warm
- Traulsen prep table and sandwich unit: ice on the coil
- Traulsen undercounter and worktop refrigerator: not holding temperature during service
- Traulsen undercounter and worktop refrigerator: compressor very hot or tripping
- Traulsen undercounter and worktop refrigerator: drawers not sealing
- Traulsen blast chiller: cycle takes too long
- Traulsen blast chiller: probe errors
- Traulsen blast chiller: not reaching target temperature
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Reach-In RefrigeratorCafés & Coffee Shops
Dairy reach-in warm at the top shelf
- What we found
- Evaporator fan blade cracked, poor airflow
- What we did
- Replaced fan blade and motor, rebalanced airflow
✓ Typically fixed in one visit
- Undercounter & Worktop RefrigeratorRestaurants
Chef base losing temperature during the rush
- What we found
- Front grille and condenser clogged with grease
- What we did
- Cleaned the condenser, replaced a worn drawer gasket
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitRestaurants
Sandwich unit lid won't stay open
- What we found
- Broken lid hinge pin
- What we did
- Replaced the hinge set and adjusted the lid
✓ Typically fixed the same day
- Blast ChillerCatering & Commissary Kitchens
Blast chiller cycles taking too long
- What we found
- Food probe reading wrong and dirty condenser
- What we did
- Replaced the probe, cleaned the condenser
✓ Typically fixed in one visit
- Reach-In RefrigeratorRestaurants
Two-door reach-in at 45°F on the line
- What we found
- Condenser fan motor not running
- What we did
- Replaced the condenser fan motor and cleaned the coil
✓ Typically fixed in one visit
- Reach-In FreezerPizzerias
Reach-in freezer frosting up every few days
- What we found
- Defrost heater open circuit
- What we did
- Replaced the defrost heater and tested a full defrost cycle
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitPizzerias
Pizza prep table rail pans at 46°F
- What we found
- Dirty condenser and weak evaporator fan
- What we did
- Cleaned the condenser, replaced the fan motor, rail back to 39°F
✓ Typically fixed in one visit
- Walk-In CoolerRestaurants
Walk-in cooler at 48°F before dinner service
- What we found
- Evaporator fan motor seized; coil starting to ice
- What we did
- Replaced the fan motor, cleared the coil, verified 36°F box temperature
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Traulsen repair near you
- Traulsen repair in Ballantyne
- Traulsen repair in Pineville
- Traulsen repair in Matthews
- Traulsen repair in Mint Hill
- Traulsen repair in Stallings
- Traulsen repair in Indian Trail
- Traulsen repair in Weddington
- Traulsen repair in Wesley Chapel
- Traulsen repair in Waxhaw
- Traulsen repair in Monroe
- Traulsen repair in Fort Mill
- Traulsen repair in Uptown Charlotte
- Traulsen repair in South End
- Traulsen repair in Dilworth
- Traulsen repair in Myers Park
- Traulsen repair in SouthPark
- Traulsen repair in Plaza Midwood
- Traulsen repair in NoDa
- Traulsen repair in University City
- Traulsen repair in Steele Creek
- Traulsen repair in Cotswold
- Traulsen repair in Elizabeth
- Traulsen repair in Eastover
- Traulsen repair in Blakeney
- Traulsen repair in Piper Glen
- Traulsen repair in Providence Plantation
- Traulsen repair in Rea Farms
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Do you repair Traulsen equipment in Charlotte?
Yes. We repair Traulsen reach-in refrigerator, reach-in freezer, prep table and sandwich unit, undercounter and worktop refrigerator, blast chiller across Charlotte and surrounding cities.
Are you a Traulsen authorized service agent?
No. We are an independent commercial service company. We work on Traulsen equipment using OEM or equivalent parts and back our work with a 30-day labor and 90-day parts warranty.
How much does Traulsen repair cost?
The service call is $135 and includes diagnosis. You approve a written price before the repair, with $50 off when you book online.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Charlotte and the surrounding area.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |