Griddle & Charbroiler Repair in Weddington, NC
Our griddle and charbroiler repair service covers all of Weddington, NC.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
We know the local businesses, the building types and how hot a Weddington kitchen gets in July. We repair gas and electric griddles, flat tops, clamshell grills, charbroilers and salamanders so you get even heat across the whole cooking surface.
Griddle & Charbroiler repair for Weddington businesses
Weddington's restaurants, country clubs and shopping centers cluster along Providence Road and Weddington Corners. We serve businesses near Providence Road (NC-16), Weddington Corners and Weddington Road, including ZIP codes 28104, 28173 in Union County, NC.
Many of our Weddington customers are along Providence Road (NC-16) and Weddington–Matthews Road, where busy kitchens run griddle and charbroiler equipment hard from open to close. Summer heat in the Charlotte region pushes condensers and compressors to their limit; for Weddington kitchens we check airflow, coil condition and electrical parts on every visit. Our technicians are in Weddington most days of the week, so a call from a business on Weddington Road usually fits into the same day's route. Union County health inspectors check cold-holding at 41°F or below and hot-holding at 135°F or above — we repair your griddle and charbroiler to hold those numbers.
Signs you need griddle and charbroiler repair
- Temperature not matching the dial
- Cold spots on the griddle
- Burner won't light
- Charbroiler flames uneven
- Clamshell platen not heating
- Pilot going out
What our technicians do
Cold spots, burners that won't light and thermostats that drift are the usual problems.
- Clamshell controls repair
- Thermostat replacement and calibration
- Radiant and grate replacement
- Gas valve replacement
- Burner and pilot repair
- Element replacement (electric)
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Griddle & CharbroilerFood Trucks
Griddle has a cold spot on one side
- What we found
- Clogged burner ports
- What we did
- Cleaned and adjusted the burner, checked the thermostat
✓ Typically fixed in one visit
- Commercial DishwasherHotels & Banquet Facilities
Dish machine final rinse at 160°F
- What we found
- Booster heater element burned out
- What we did
- Replaced the element, verified 180°F final rinse
✓ Typically fixed in one visit
- Reach-In RefrigeratorRestaurants
Two-door reach-in at 45°F on the line
- What we found
- Condenser fan motor not running
- What we did
- Replaced the condenser fan motor and cleaned the coil
✓ Typically fixed in one visit
- Coffee & Beverage EquipmentCafés & Coffee Shops
Coffee brewer not hot
- What we found
- Scale-coated heating element
- What we did
- Replaced the element, descaled the tank
✓ Typically fixed in one visit
- Walk-In CoolerGrocery Stores & Supermarkets
Walk-in cooler slowly warming over several days
- What we found
- Condenser coil packed with dust and cottonwood; high head pressure
- What we did
- Deep-cleaned the condenser, checked charge and amperage
✓ Typically fixed in one visit
- Draft Beer & Keg CoolerBreweries & Taprooms
Foamy pours on every tap
- What we found
- Glycol chiller pump failing, lines warming
- What we did
- Replaced the glycol pump and topped up glycol
✓ Typically fixed in one visit
- Ice MachineBars & Nightclubs
Ice machine making half the usual ice
- What we found
- Heavy scale on the evaporator plate
- What we did
- Descaled, sanitized and replaced the water filter
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitPizzerias
Pizza prep table rail pans at 46°F
- What we found
- Dirty condenser and weak evaporator fan
- What we did
- Cleaned the condenser, replaced the fan motor, rail back to 39°F
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Griddle & Charbroiler brands we repair in Weddington
Who we serve in Weddington
Technician tip
Season and scrape the griddle daily; heavy carbon acts as insulation and creates cold spots.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Why does my griddle have cold spots?
A clogged burner, failed thermostat or warped plate. Most are repairable.
Do you repair salamanders and cheese melters?
Yes.
How much does griddle and charbroiler repair cost in Weddington, NC?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Weddington?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Do you serve ZIP code 28104?
Yes. We serve Weddington and all of Weddington, NC, including ZIP codes 28104, 28173.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Weddington, NC.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |