Steamer, Kettle & Braising Pan Repair in Rea Farms, Charlotte
Our steamer, kettle and braising pan repair service covers all of Rea Farms, Charlotte.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
We know the local businesses, the building types and how hot a Rea Farms kitchen gets in July. Steamers, steam kettles and tilting skillets are workhorses in schools, hospitals and high-volume kitchens. We repair connectionless and boiler steamers, jacketed kettles and braising pans.
Steamer, Kettle & Braising Pan repair for Rea Farms businesses
Rea Farms is a newer mixed-use district with restaurants, cafés, a grocery anchor and medical offices. We serve businesses near the Rea Farms village center, Rea Road and Williams Pond Lane, including ZIP codes 28277 in Mecklenburg County, NC.
Businesses in ZIP 28277 can book online in 30 seconds, and the first available operator calls back during business hours. Because we also work in Blakeney and Piper Glen, a technician is often already nearby when a Rea Farms business calls. Many of our Rea Farms customers are along the Rea Farms village center and Ardrey Kell Road, where busy kitchens run steamer, kettle and braising pan equipment hard from open to close. If a repair is not worth the money, we tell you and quote the replacement — no Rea Farms customer is pushed into a new unit they don't need.
Signs you need steamer, kettle and braising pan repair
- Tilt mechanism stuck
- Scale build-up
- Kettle not heating
- Water leaking
- Low-water alarms
- No steam or slow cooking
What our technicians do
Scale, failed water level probes, heating elements, solenoid valves and tilt mechanisms cause most breakdowns.
- Water level probe replacement
- Solenoid valve replacement
- Descaling and boiler cleaning
- Element and burner repair
- Control board replacement
- Tilt gear repair
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Steamer, Kettle & Braising PanSchools & Universities
Steamer showing low-water alarm
- What we found
- Scaled water level probe
- What we did
- Cleaned the probe and delimed the generator
✓ Typically fixed in one visit
- Refrigerated Display CaseGrocery Stores & Supermarkets
Glass-door merchandiser fogging up
- What we found
- Door anti-sweat heater failed
- What we did
- Replaced the door heater and checked the controller
✓ Typically fixed in one visit
- Reach-In FreezerPizzerias
Reach-in freezer frosting up every few days
- What we found
- Defrost heater open circuit
- What we did
- Replaced the defrost heater and tested a full defrost cycle
✓ Typically fixed in one visit
- Condensing Unit & CompressorGrocery Stores & Supermarkets
Rooftop condensing unit tripping the breaker
- What we found
- Shorted condenser fan motor
- What we did
- Replaced the fan motor and checked electrical connections
✓ Typically fixed in one visit
- Walk-In CoolerRestaurants
Walk-in cooler at 48°F before dinner service
- What we found
- Evaporator fan motor seized; coil starting to ice
- What we did
- Replaced the fan motor, cleared the coil, verified 36°F box temperature
✓ Typically fixed in one visit
- Undercounter & Worktop RefrigeratorRestaurants
Chef base losing temperature during the rush
- What we found
- Front grille and condenser clogged with grease
- What we did
- Cleaned the condenser, replaced a worn drawer gasket
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitPizzerias
Pizza prep table rail pans at 46°F
- What we found
- Dirty condenser and weak evaporator fan
- What we did
- Cleaned the condenser, replaced the fan motor, rail back to 39°F
✓ Typically fixed in one visit
- Soft Serve & Frozen Drink MachineIce Cream & Frozen Yogurt Shops
Soft serve coming out runny
- What we found
- Dirty condenser and worn drive belt
- What we did
- Cleaned the condenser, replaced the belt, adjusted viscosity
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Steamer, Kettle & Braising Pan brands we repair in Rea Farms
Common problems
Technician tip
Follow the descaling schedule — hard water scale is the leading cause of steamer failure.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
How often should a steamer be descaled?
Depends on water hardness; typically monthly to quarterly.
Do you repair tilt skillets?
Yes, including tilt gears, elements and controls.
How much does steamer, kettle and braising pan repair cost in Rea Farms, Charlotte?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Rea Farms?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Do you serve ZIP code 28277?
Yes. We serve Rea Farms and all of Rea Farms, Charlotte, including ZIP codes 28277.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Rea Farms, Charlotte.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |