Soft Serve & Frozen Drink Machine Repair in Providence Plantation, Charlotte
From Providence Road to the Providence Road and I-485 interchange, we provide soft serve and frozen drink machine repair for Providence Plantation restaurants, cafés, bars and grocery stores.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
Soft serve, shake, frozen yogurt and frozen beverage machines combine refrigeration and mechanical parts — exactly what our technicians do. We repair them for ice cream shops, restaurants and convenience stores.
Soft Serve & Frozen Drink Machine repair for Providence Plantation businesses
Providence Plantation's shopping centers along Providence Road serve fast-growing south Charlotte. We serve businesses near Providence Road, the Providence Road and I-485 interchange and Ardrey Kell Road, including ZIP codes 28270, 28277 in Mecklenburg County, NC.
When a part is not on the truck, we order it the same day from Charlotte-area suppliers and come back to the Providence Road and I-485 interchange as soon as it arrives. Mecklenburg County health inspectors check cold-holding at 41°F or below and hot-holding at 135°F or above — we repair your soft serve and frozen drink machine to hold those numbers. Our technicians are in Providence Plantation most days of the week, so a call from a business on Ardrey Kell Road usually fits into the same day's route. We document every visit with the temperatures we measured and the parts we replaced, which helps Providence Plantation managers with inspections and budgeting.
Signs you need soft serve and frozen drink machine repair
- Beater not turning
- Machine running warm
- Machine freezing up
- Error codes
- Leaking from the door
- Product too soft or runny
What our technicians do
Product too soft or too hard, freeze-ups, drive belts, beater motors and refrigeration faults are the main problems.
- Control board repair
- Viscosity control calibration
- O-ring and gasket kits
- Condenser cleaning
- Refrigeration diagnosis and repair
- Drive belt and beater motor replacement
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Soft Serve & Frozen Drink MachineIce Cream & Frozen Yogurt Shops
Soft serve coming out runny
- What we found
- Dirty condenser and worn drive belt
- What we did
- Cleaned the condenser, replaced the belt, adjusted viscosity
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitPizzerias
Pizza prep table rail pans at 46°F
- What we found
- Dirty condenser and weak evaporator fan
- What we did
- Cleaned the condenser, replaced the fan motor, rail back to 39°F
✓ Typically fixed in one visit
- Commercial DishwasherHotels & Banquet Facilities
Dish machine final rinse at 160°F
- What we found
- Booster heater element burned out
- What we did
- Replaced the element, verified 180°F final rinse
✓ Typically fixed in one visit
- Ice MachineHospitals & Senior Living
Nugget ice machine leaking onto the floor
- What we found
- Cracked drain hose behind the unit
- What we did
- Replaced the hose, cleaned and sanitized the machine
✓ Typically fixed in one visit
- Commercial FryerRestaurants
Fryer won't heat before lunch
- What we found
- Weak thermopile
- What we did
- Replaced the thermopile and tested the gas valve
✓ Typically fixed in one visit
- Walk-In CoolerGrocery Stores & Supermarkets
Walk-in cooler slowly warming over several days
- What we found
- Condenser coil packed with dust and cottonwood; high head pressure
- What we did
- Deep-cleaned the condenser, checked charge and amperage
✓ Typically fixed in one visit
- Walk-In CoolerBreweries & Taprooms
Keg walk-in short-cycling on hot afternoons
- What we found
- Failed run capacitor and pitted contactor
- What we did
- Replaced capacitor and contactor, tested compressor under load
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitRestaurants
Sandwich unit lid won't stay open
- What we found
- Broken lid hinge pin
- What we did
- Replaced the hinge set and adjusted the lid
✓ Typically fixed the same day
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Soft Serve & Frozen Drink Machine brands we repair in Providence Plantation
Common problems
Who we serve in Providence Plantation
Soft Serve & Frozen Drink Machine repair nearby
Technician tip
Replace O-rings and seals on schedule — a few dollars of rubber protects the whole machine.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Why is my soft serve too runny?
Low refrigeration capacity, a dirty condenser or viscosity settings out of adjustment.
Do you repair frozen beverage (slush) machines?
Yes.
How much does soft serve and frozen drink machine repair cost in Providence Plantation, Charlotte?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Providence Plantation?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Do you serve ZIP code 28270?
Yes. We serve Providence Plantation and all of Providence Plantation, Charlotte, including ZIP codes 28270, 28277.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Providence Plantation, Charlotte.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |