Turbo Air Repair in Plaza Midwood, Charlotte
Our Turbo Air repair service covers all of Plaza Midwood, Charlotte.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
We know the local businesses, the building types and how hot a Plaza Midwood kitchen gets in July. Turbo Air makes reach-ins, prep tables, undercounters and display cases, and we repair them on-site.
Turbo Air service for Plaza Midwood businesses
Plaza Midwood's independent restaurants, bars and cafés line Central Avenue and The Plaza. We serve businesses near Central Avenue, The Plaza and Commonwealth Avenue, including ZIP codes 28205 in Mecklenburg County, NC.
Our technicians are in Plaza Midwood most days of the week, so a call from a business on Commonwealth Avenue usually fits into the same day's route. From quick-service counters near Commonwealth Avenue to full kitchens near Central Avenue, Plaza Midwood businesses rely on us for Turbo Air work. We document every visit with the temperatures we measured and the parts we replaced, which helps Plaza Midwood managers with inspections and budgeting. Summer heat in the Charlotte region pushes condensers and compressors to their limit; for Plaza Midwood kitchens we check airflow, coil condition and electrical parts on every visit.
Turbo Air problems we fix in Plaza Midwood
- Turbo Air reach-in refrigerator: compressor clicking on and off
- Turbo Air reach-in refrigerator: water under the unit
- Turbo Air reach-in freezer: door hard to open or not sealing
- Turbo Air reach-in freezer: heavy frost on the coil or walls
- Turbo Air prep table and sandwich unit: cabinet cold but rail warm
- Turbo Air prep table and sandwich unit: compressor overheating
- Turbo Air undercounter and worktop refrigerator: compressor very hot or tripping
- Turbo Air undercounter and worktop refrigerator: chef base sagging or drawers sticking
- Turbo Air refrigerated display case: water on the floor
- Turbo Air refrigerated display case: lights out or flickering
- Turbo Air bar cooler and back bar: loud fan or compressor
- Turbo Air bar cooler and back bar: unit running constantly
Turbo Air equipment we repair
- Turbo Air Reach-In Refrigerator repair in Plaza Midwood
- Turbo Air Reach-In Freezer repair in Plaza Midwood
- Turbo Air Prep Table & Sandwich Unit repair in Plaza Midwood
- Turbo Air Undercounter & Worktop Refrigerator repair in Plaza Midwood
- Turbo Air Refrigerated Display Case repair in Plaza Midwood
- Turbo Air Bar Cooler & Back Bar repair in Plaza Midwood
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Prep Table & Sandwich UnitRestaurants
Sandwich unit lid won't stay open
- What we found
- Broken lid hinge pin
- What we did
- Replaced the hinge set and adjusted the lid
✓ Typically fixed the same day
- Refrigerated Display CaseBakeries
Bakery display case warm at the front
- What we found
- Evaporator iced from a bad defrost timer
- What we did
- Replaced the timer, defrosted, verified temperatures
✓ Typically fixed in one visit
- Undercounter & Worktop RefrigeratorRestaurants
Chef base losing temperature during the rush
- What we found
- Front grille and condenser clogged with grease
- What we did
- Cleaned the condenser, replaced a worn drawer gasket
✓ Typically fixed in one visit
- Reach-In FreezerPizzerias
Reach-in freezer frosting up every few days
- What we found
- Defrost heater open circuit
- What we did
- Replaced the defrost heater and tested a full defrost cycle
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitPizzerias
Pizza prep table rail pans at 46°F
- What we found
- Dirty condenser and weak evaporator fan
- What we did
- Cleaned the condenser, replaced the fan motor, rail back to 39°F
✓ Typically fixed in one visit
- Reach-In RefrigeratorCafés & Coffee Shops
Dairy reach-in warm at the top shelf
- What we found
- Evaporator fan blade cracked, poor airflow
- What we did
- Replaced fan blade and motor, rebalanced airflow
✓ Typically fixed in one visit
- Refrigerated Display CaseGrocery Stores & Supermarkets
Glass-door merchandiser fogging up
- What we found
- Door anti-sweat heater failed
- What we did
- Replaced the door heater and checked the controller
✓ Typically fixed in one visit
- Reach-In RefrigeratorRestaurants
Two-door reach-in at 45°F on the line
- What we found
- Condenser fan motor not running
- What we did
- Replaced the condenser fan motor and cleaned the coil
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Do you repair Turbo Air equipment in Plaza Midwood?
Yes. We repair Turbo Air reach-in refrigerator, reach-in freezer, prep table and sandwich unit, undercounter and worktop refrigerator, refrigerated display case, bar cooler and back bar for businesses throughout Plaza Midwood, Charlotte.
Are you an authorized Turbo Air dealer?
No — we are an independent commercial service company. We repair Turbo Air equipment and warranty our work for 30 days labor and 90 days parts.
How much does Turbo Air repair cost in Plaza Midwood, Charlotte?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Plaza Midwood?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Plaza Midwood, Charlotte.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |