Ice Machine Repair in NoDa, Charlotte
NoDa businesses call us for fast, honest ice machine repair.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
You get a flat $135 service call and a written price before any work starts. Bars, restaurants, hotels and healthcare facilities run through hundreds of pounds of ice a day. We repair modular, undercounter and self-contained ice machines, nugget and flake ice makers, remote condensers and the bins and dispensers that go with them.
Ice Machine repair for NoDa businesses
NoDa, Charlotte's arts district, is full of breweries, music venues, bars and restaurants that live on cold beer and working ice machines. We serve businesses near North Davidson Street, 36th Street and the Blue Line stations, including ZIP codes 28205, 28206 in Mecklenburg County, NC.
Our technicians are in NoDa most days of the week, so a call from a business on the Blue Line stations usually fits into the same day's route. Businesses in ZIP 28205 and 28206 can book online in 30 seconds, and the first available operator calls back during business hours. Summer heat in the Charlotte region pushes condensers and compressors to their limit; for NoDa kitchens we check airflow, coil condition and electrical parts on every visit. Mecklenburg County health inspectors check cold-holding at 41°F or below and hot-holding at 135°F or above — we repair your ice machine to hold those numbers.
Signs you need ice machine repair
- Machine not making ice or making very little
- Bad taste or odor in the ice
- Ice freezing to the evaporator and not harvesting
- Water leaking from the machine or bin
- Cubes small, cloudy, hollow or stuck together
- Error lights or flashing codes
What our technicians do
Ice machines fail for a short list of reasons: scale build-up on the evaporator, a bad water inlet valve or pump, a failing harvest assist, dirty air-cooled condensers, or a bad sensor or thermistor. We clean, descale and sanitize as part of the repair so the machine keeps producing.
- Replace bin thermostats and ice thickness probes
- Diagnose error codes and control boards
- Repair harvest assist, hot gas valves and sensors
- Clean or repair air- and water-cooled condensers
- Water filter replacement
- Repair remote condensers and line sets
- Replace water pumps, inlet valves and float switches
- Descale, clean and sanitize evaporator and water system
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Ice MachineHotels & Banquet Facilities
Floor ice machine not harvesting
- What we found
- Faulty harvest assist and a weak water pump
- What we did
- Replaced both parts and ran test cycles
✓ Typically fixed in one visit
- Ice MachineHospitals & Senior Living
Nugget ice machine leaking onto the floor
- What we found
- Cracked drain hose behind the unit
- What we did
- Replaced the hose, cleaned and sanitized the machine
✓ Typically fixed in one visit
- Ice MachineBars & Nightclubs
Ice machine making half the usual ice
- What we found
- Heavy scale on the evaporator plate
- What we did
- Descaled, sanitized and replaced the water filter
✓ Typically fixed in one visit
- Ice MachineConvenience Stores & Gas Stations
Ice machine showing a flashing error light
- What we found
- Water inlet valve not opening
- What we did
- Replaced the inlet valve and verified full fill
✓ Typically fixed in one visit
- Soft Serve & Frozen Drink MachineIce Cream & Frozen Yogurt Shops
Soft serve coming out runny
- What we found
- Dirty condenser and worn drive belt
- What we did
- Cleaned the condenser, replaced the belt, adjusted viscosity
✓ Typically fixed in one visit
- Commercial Range & CooktopRestaurants
Range pilots keep going out
- What we found
- Worn thermocouples on two burners
- What we did
- Replaced thermocouples, cleaned pilot assemblies
✓ Typically fixed in one visit
- Mixer, Slicer & Food PrepBakeries
Planetary mixer grinding in second speed
- What we found
- Worn transmission gear
- What we did
- Replaced the gear and lubricated the gearbox
✓ Usually needs a part ordered — two visits
- Commercial OvenBakeries
Convection oven baking unevenly
- What we found
- Blower motor bearings worn
- What we did
- Replaced the convection blower motor
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Who we serve in NoDa
Technician tip
Schedule a cleaning and descale every 6 months — in Charlotte-area water, scale is the number one cause of low ice production.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
How often should a commercial ice machine be cleaned?
Manufacturers recommend at least every 6 months. High-volume bars and restaurants often benefit from every 3–4 months.
Why does my ice machine make ice but not drop it?
That is a harvest problem — usually scale on the evaporator, a weak harvest assist, a bad hot gas valve or a faulty sensor.
How much does ice machine repair cost in NoDa, Charlotte?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in NoDa?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Do you serve ZIP code 28205?
Yes. We serve NoDa and all of NoDa, Charlotte, including ZIP codes 28205, 28206.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve NoDa, Charlotte.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |