Vulcan Repair in Dilworth, Charlotte
Our Vulcan repair service covers all of Dilworth, Charlotte.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
We know the local businesses, the building types and how hot a Dilworth kitchen gets in July. Vulcan makes ranges, ovens, fryers, griddles and steamers, and we repair them on-site.
Vulcan service for Dilworth businesses
Dilworth's East Boulevard restaurants, coffee shops and bars sit in historic buildings where equipment space is tight and reliability matters. We serve businesses near East Boulevard, Kenilworth Avenue and Latta Park, including ZIP codes 28203, 28204 in Mecklenburg County, NC.
Because we also work in South End and Myers Park, a technician is often already nearby when a Dilworth business calls. Our technicians are in Dilworth most days of the week, so a call from a business on Latta Park usually fits into the same day's route. Mecklenburg County health inspectors check cold-holding at 41°F or below and hot-holding at 135°F or above — we repair your Vulcan to hold those numbers. Many of our Dilworth customers are along East Boulevard and the Morehead Street corridor, where busy kitchens run Vulcan equipment hard from open to close.
Vulcan problems we fix in Dilworth
- Vulcan commercial oven: door won't close or seal
- Vulcan commercial oven: oven won't light or heat
- Vulcan commercial range and cooktop: oven below the range not heating
- Vulcan commercial range and cooktop: burner won't light or keeps going out
- Vulcan commercial fryer: fryer won't light or heat
- Vulcan commercial fryer: filter pump not running
- Vulcan griddle and charbroiler: charbroiler flames uneven
- Vulcan griddle and charbroiler: temperature not matching the dial
- Vulcan steamer, kettle and braising pan: low-water alarms
- Vulcan steamer, kettle and braising pan: scale build-up
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Steamer, Kettle & Braising PanSchools & Universities
Steamer showing low-water alarm
- What we found
- Scaled water level probe
- What we did
- Cleaned the probe and delimed the generator
✓ Typically fixed in one visit
- Commercial OvenBakeries
Convection oven baking unevenly
- What we found
- Blower motor bearings worn
- What we did
- Replaced the convection blower motor
✓ Typically fixed in one visit
- Commercial FryerRestaurants
Fryer won't heat before lunch
- What we found
- Weak thermopile
- What we did
- Replaced the thermopile and tested the gas valve
✓ Typically fixed in one visit
- Commercial OvenPizzerias
Conveyor pizza oven not reaching temperature
- What we found
- Failed igniter and flame sensor
- What we did
- Replaced igniter and sensor, verified bake temperature
✓ Typically fixed in one visit
- Griddle & CharbroilerFood Trucks
Griddle has a cold spot on one side
- What we found
- Clogged burner ports
- What we did
- Cleaned and adjusted the burner, checked the thermostat
✓ Typically fixed in one visit
- Commercial FryerConvenience Stores & Gas Stations
Fryer overheating and tripping the high-limit
- What we found
- Temperature probe failing
- What we did
- Replaced the probe and calibrated the controller
✓ Typically fixed in one visit
- Commercial Range & CooktopRestaurants
Range pilots keep going out
- What we found
- Worn thermocouples on two burners
- What we did
- Replaced thermocouples, cleaned pilot assemblies
✓ Typically fixed in one visit
- Mixer, Slicer & Food PrepBakeries
Planetary mixer grinding in second speed
- What we found
- Worn transmission gear
- What we did
- Replaced the gear and lubricated the gearbox
✓ Usually needs a part ordered — two visits
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Other brands in Dilworth
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Do you repair Vulcan equipment in Dilworth?
Yes. We repair Vulcan commercial oven, commercial range and cooktop, commercial fryer, griddle and charbroiler, steamer, kettle and braising pan for businesses throughout Dilworth, Charlotte.
Are you an authorized Vulcan dealer?
No — we are an independent commercial service company. We repair Vulcan equipment and warranty our work for 30 days labor and 90 days parts.
How much does Vulcan repair cost in Dilworth, Charlotte?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Dilworth?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Dilworth, Charlotte.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |