Commercial Fryer Repair in Ballantyne, NC
Need commercial fryer repair in Ballantyne, NC? We send commercial technicians to restaurants, bars, stores and institutional kitchens across Ballantyne every week.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
A down fryer can stop a whole menu. We repair gas and electric open fryers, pressure fryers, filtration systems and computerized fryer controls.
Commercial Fryer repair for Ballantyne businesses
Ballantyne mixes corporate campuses, hotels, corporate cafeterias and a dense row of restaurants along Johnston Road. We serve businesses near Ballantyne Corporate Park, Johnston Road and Ballantyne Village, including ZIP codes 28277 in Mecklenburg County, NC.
Businesses in ZIP 28277 can book online in 30 seconds, and the first available operator calls back during business hours. We document every visit with the temperatures we measured and the parts we replaced, which helps Ballantyne managers with inspections and budgeting. From quick-service counters near Ballantyne Village to full kitchens near Ballantyne Corporate Park, Ballantyne businesses rely on us for commercial fryer work. Our technicians are in Ballantyne most days of the week, so a call from a business on Ballantyne Village usually fits into the same day's route.
Signs you need commercial fryer repair
- Computer showing errors
- Filter pump not running
- Oil overheating or not reaching set point
- Pilot goes out
- High-limit tripping
- Fryer won't light or heat
What our technicians do
Fryers fail from bad pilots, thermopiles, gas valves, high-limit switches, temperature probes and filter pumps. We fix them fast so oil stays at temperature.
- Controller replacement
- Temperature probe and thermostat replacement
- Filter pump and motor repair
- Drain valve repair
- Pilot, thermopile and gas valve replacement
- High-limit switch replacement
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Commercial FryerRestaurants
Fryer won't heat before lunch
- What we found
- Weak thermopile
- What we did
- Replaced the thermopile and tested the gas valve
✓ Typically fixed in one visit
- Commercial FryerConvenience Stores & Gas Stations
Fryer overheating and tripping the high-limit
- What we found
- Temperature probe failing
- What we did
- Replaced the probe and calibrated the controller
✓ Typically fixed in one visit
- Food Warmer & Holding CabinetCountry Clubs & Event Venues
Holding cabinet not heating before an event
- What we found
- Failed heating element
- What we did
- Replaced the element and tested the thermostat
✓ Typically fixed in one visit
- Bar Cooler & Back BarBars & Nightclubs
Back-bar cooler bottles not cold
- What we found
- Thermostat out of calibration
- What we did
- Replaced the thermostat and set to 36°F
✓ Typically fixed in one visit
- Walk-In FreezerRestaurants
Walk-in freezer iced solid, product softening
- What we found
- Defrost termination thermostat failed
- What we did
- Replaced the thermostat, defrosted the coil, confirmed -5°F
✓ Typically fixed in one visit
- Walk-In CoolerGrocery Stores & Supermarkets
Walk-in cooler slowly warming over several days
- What we found
- Condenser coil packed with dust and cottonwood; high head pressure
- What we did
- Deep-cleaned the condenser, checked charge and amperage
✓ Typically fixed in one visit
- Ice MachineConvenience Stores & Gas Stations
Ice machine showing a flashing error light
- What we found
- Water inlet valve not opening
- What we did
- Replaced the inlet valve and verified full fill
✓ Typically fixed in one visit
- Mixer, Slicer & Food PrepBakeries
Planetary mixer grinding in second speed
- What we found
- Worn transmission gear
- What we did
- Replaced the gear and lubricated the gearbox
✓ Usually needs a part ordered — two visits
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Common problems
Who we serve in Ballantyne
Technician tip
Filter oil daily and boil out the pot weekly — carbon on the probe throws off temperature.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
Why does my fryer keep shutting off?
Usually a weak thermopile, a failing gas valve or a high-limit switch tripping.
Do you repair pressure fryers?
Yes, including lid, gasket and pressure system repairs.
How much does commercial fryer repair cost in Ballantyne, NC?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Ballantyne?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Do you serve ZIP code 28277?
Yes. We serve Ballantyne and all of Ballantyne, NC, including ZIP codes 28277.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Ballantyne, NC.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |