Steamer, Kettle & Braising Pan Repair in Indian Trail, NC
Our steamer, kettle and braising pan repair service covers all of Indian Trail, NC.
- Licensed & insuredCommercial refrigeration and kitchen equipment technicians
- $135 service callClear price before any work starts
- $50 off your repairWhen you book online or mention the website
- Warranty on every job30-day labor, 90-day parts, extended 1, 3 or 5 years on select work
- Open 7 days a weekMon–Sat 8 AM–6 PM · Sun 10 AM–3 PM
- Same-day serviceWhen you call early — trucks stocked with common parts
We know the local businesses, the building types and how hot a Indian Trail kitchen gets in July. Steamers, steam kettles and tilting skillets are workhorses in schools, hospitals and high-volume kitchens. We repair connectionless and boiler steamers, jacketed kettles and braising pans.
Steamer, Kettle & Braising Pan repair for Indian Trail businesses
Indian Trail is one of Union County's fastest-growing towns, with new restaurants, grocery anchors and school kitchens opening every year. We serve businesses near US-74, Indian Trail Road and Wesley Chapel–Stouts Road, including ZIP codes 28079 in Union County, NC.
When a part is not on the truck, we order it the same day from Charlotte-area suppliers and come back to Indian Trail Road as soon as it arrives. Many of our Indian Trail customers are along US-74 and Unionville–Indian Trail Road, where busy kitchens run steamer, kettle and braising pan equipment hard from open to close. From quick-service counters near Wesley Chapel–Stouts Road to full kitchens near US-74, Indian Trail businesses rely on us for steamer, kettle and braising pan work. We document every visit with the temperatures we measured and the parts we replaced, which helps Indian Trail managers with inspections and budgeting.
Signs you need steamer, kettle and braising pan repair
- Water leaking
- No steam or slow cooking
- Tilt mechanism stuck
- Kettle not heating
- Low-water alarms
- Scale build-up
What our technicians do
Scale, failed water level probes, heating elements, solenoid valves and tilt mechanisms cause most breakdowns.
- Tilt gear repair
- Control board replacement
- Solenoid valve replacement
- Descaling and boiler cleaning
- Water level probe replacement
- Element and burner repair
Save $50 on your repair
Book online or mention our website when you call and we take $50 off the repair. The service call is a flat $135, and you get a clear price before any work begins — no surprises.
Typical jobs we handle
Examples of common repairs on commercial refrigeration and kitchen equipment.
- Steamer, Kettle & Braising PanSchools & Universities
Steamer showing low-water alarm
- What we found
- Scaled water level probe
- What we did
- Cleaned the probe and delimed the generator
✓ Typically fixed in one visit
- Griddle & CharbroilerFood Trucks
Griddle has a cold spot on one side
- What we found
- Clogged burner ports
- What we did
- Cleaned and adjusted the burner, checked the thermostat
✓ Typically fixed in one visit
- Refrigerated Display CaseGrocery Stores & Supermarkets
Glass-door merchandiser fogging up
- What we found
- Door anti-sweat heater failed
- What we did
- Replaced the door heater and checked the controller
✓ Typically fixed in one visit
- Commercial OvenBakeries
Convection oven baking unevenly
- What we found
- Blower motor bearings worn
- What we did
- Replaced the convection blower motor
✓ Typically fixed in one visit
- Commercial OvenPizzerias
Conveyor pizza oven not reaching temperature
- What we found
- Failed igniter and flame sensor
- What we did
- Replaced igniter and sensor, verified bake temperature
✓ Typically fixed in one visit
- Ice MachineConvenience Stores & Gas Stations
Ice machine showing a flashing error light
- What we found
- Water inlet valve not opening
- What we did
- Replaced the inlet valve and verified full fill
✓ Typically fixed in one visit
- Prep Table & Sandwich UnitRestaurants
Sandwich unit lid won't stay open
- What we found
- Broken lid hinge pin
- What we did
- Replaced the hinge set and adjusted the lid
✓ Typically fixed the same day
- Ice MachineHospitals & Senior Living
Nugget ice machine leaking onto the floor
- What we found
- Cracked drain hose behind the unit
- What we did
- Replaced the hose, cleaned and sanitized the machine
✓ Typically fixed in one visit
Examples for illustration. Every job is diagnosed on site; parts, time and price depend on the equipment.
Steamer, Kettle & Braising Pan brands we repair in Indian Trail
Common problems
Technician tip
Follow the descaling schedule — hard water scale is the leading cause of steamer failure.
Our warranty
Labor warranty on every repair.
Parts warranty on every part we install.
Extended warranty available on select repairs and installations. The exact term is written on your estimate before work starts.
Frequently asked questions
How often should a steamer be descaled?
Depends on water hardness; typically monthly to quarterly.
Do you repair tilt skillets?
Yes, including tilt gears, elements and controls.
How much does steamer, kettle and braising pan repair cost in Indian Trail, NC?
The service call is a flat $135, which covers the trip and diagnosis. After diagnosis you get a written price for the repair before any work starts, and you save $50 on the repair when you book online or mention our website.
What are your hours in Indian Trail?
We are open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). Call (980) 983-2911 or send a request online and the first available operator will call you back.
Do you serve ZIP code 28079?
Yes. We serve Indian Trail and all of Indian Trail, NC, including ZIP codes 28079.
Hours & contact
Commercial Appliances is open Monday through Saturday from 8:00 AM to 6:00 PM, and Sunday from 10:00 AM to 3:00 PM (Eastern Time). We serve Indian Trail, NC.
Phone: (980) 983-2911
Email: omnicommercialrefrigeration@gmail.com
Based in Charlotte, NC. We are a mobile service company — our technicians come to your business.
| Monday | 8:00 AM – 6:00 PM |
|---|---|
| Tuesday | 8:00 AM – 6:00 PM |
| Wednesday | 8:00 AM – 6:00 PM |
| Thursday | 8:00 AM – 6:00 PM |
| Friday | 8:00 AM – 6:00 PM |
| Saturday | 8:00 AM – 6:00 PM |
| Sunday | 10:00 AM – 3:00 PM |